Which Type of Cold Room is Suitable For My Business?

There are several types of cold rooms, but before going into details, what do they do, and what exactly are these types of cameras for?

They are installations intended for the cooling of spaces, products, environments… that require very specific characteristics and specifications for their operation or conservation.

Types of Cold Room Construction

There are two main types of cold rooms Construction Suppliers

  1. Refrigeration: its temperature ranges between 32ºF and 64.4ºF. They are known as “positive temperature” and are intended primarily for the preservation of perishable foods.
  2. Freezing: they reach freezing temperatures below 32ºF (they are, therefore, “negative temperature”) based on the storage or conservation needs that are had

However, and beyond this categorization, we can also differentiate cold rooms according to design and size.

Refrigerant Cold Rooms

Positive temperature is used for the conservation of perishable foods such as meat, fruits, or vegetables. In addition, it is also very useful in handling chemicals and in work chains or processes that include them, such as in the pharmaceutical industry.

The interior temperature of this type of chamber is always above zero degrees, and never below the freezing point of water at atmospheric pressure.

These chambers are also known as cooling chambers or cold rooms, and are common in the hospitality sector or food and beverage warehouses, among others.

Ultra-Low Temperature (ULT) Freezer Cold Rooms

ULT Freezer cold rooms can generate temperatures below 32ºF. Therefore, it can be used to freeze different types of products and help preserve their properties since they favor atmospheric humidity.

They are common in hotels and restaurants, where products need to be kept frozen for a while. Within the industry, we find them in the agri-food, dairy, or, again, pharmaceutical sectors or chemical laboratories.

Freezing Tunnels

The freezing tunnels reach temperatures between -25.6ºF and -40ºF through continuous currents of very cold air. Its design is focused on each product (mostly food) being frozen quickly and individually while it moves inside the chamber.

Its low temperatures are the only way to guarantee the structural conservation of the product from the moment it is introduced into the tunnel until it reaches its destination.

Its most widespread use is in the agricultural industry, although it is also common in the pharmaceutical or cosmetic industry.

Blast Chillers

These cold rooms allow freshly cooked food to be quickly cooled to prevent the appearance of bacteria and guarantee its optimum conservation for a certain time without implying a loss of its qualities.

It is a widely used system in the hotel industry since it allows food cooked at 194ºF+ to go down to just 37.4ºF in less than 90 minutes.

As you can see, although the methods vary slightly, their final intention is always the same: to guarantee the preservation of the product and its characteristics, as well as to offer a suitable environment for the handling of substances that require very controlled and specific conditions.

So, which cold storage will you be getting for your business? Not sure yet? No problem. You can contact www.americanwalkincoolers.com/coldstoragewarehouse.html

With over 40 years in business, they are known for being a National and International Commercial Refrigeration company in the USA- American Walk-In Coolers

Understanding the Distribution Circuit of Logistics

With the development of e-commerce, Amazon, and Covid-19 restraints on businesses, consumer habits have changed considerably. Social networks now serve as an interface between consumers and sellers. The result is an increasingly complex distribution circuit, which can generate high costs and slow down delivery times. To remain competitive and retain its customers, a company must therefore be innovative and optimize its distribution circuit.

What is a distribution channel?

Distribution encompasses the relationships set up between a producer or manufacturer and the final consumer in order for the latter to have access to a product. This takes a path, a distribution channel. The same product can also be sold through different channels. All of these transport routes form a distribution circuit. It is therefore all the channels set up to market products.

The sale can therefore be:

  • Mono channel: a single distribution method is used by the company. The product is sold only at a physical point of sale or only on the internet. Large companies like Amazon warehouse fulfillment centers and providers are “pure players”, who have chosen to do without physical stores and sell their goods only online.
  • Multichannel: the consumer can buy the same product through different distribution channels, physical and virtual.
  • Cross-channel: the distribution channels are complementary. For example, in a “web-to-store” method, the consumer makes his choice online and goes to a physical point of sale to make his purchase.
  • Omnichannel: in this system, there are no longer any boundaries between distribution channels. The consumer has a choice. They can book online, pay in-store (click-and-collect), pick up their order in “drive” mode, buy on the internet and have it delivered to their home…

The Different Distribution Channels

A distribution channel is essentially defined by its length and the number of intermediaries that make it up. Thus, we mainly distinguish:

  • The direct circuit: the producer or manufacturer sells his products directly to the final consumer, without an intermediary. His margin is preserved, but he has to store his goods, manage his marketing strategy, etc. Direct selling is currently experiencing renewed interest from consumers who increasingly want to “buy local”.
  • The short circuit: in this case, the producer or manufacturer uses an intermediary for the distribution of his production. It can be a retailer or a store in which the production is sold directly to the final consumer. For some time now, we have even seen pop-up shops appear, pop-up stores that allow a producer to have a point of sale for a short period of time.
  • The long circuit involves several intermediaries. Between the producer and the consumer, the product passes through the hands of a distributor, a wholesaler or a purchasing group, and a retailer. This solution reduces storage and logistics costs, but the producer’s margin is reduced. And he has no control over the distribution of his production. This method is favored by large retailers.

The more intermediaries a distribution circuit has, the higher the price of the product, insofar as each of them takes their margin to be remunerated. In this situation, the producer may also have to lower his price to guarantee an attractive final sale price. The choice of distribution channel is therefore crucial. A reputable Logistics Company- Soonerlogistics.com can help you find the perfect distribution channel for your business. It must be efficient, profitable, and capable of satisfying consumer expectations.

5 Tricks To Make Your Wheels Shiny

Surely, when you have gone to an automotive center, you have been struck by the shine of the rims of the cars for sale. Do you want the ones in your car to look the same? Then learn 5 simple tricks to make your wheels shiny, just like those of a new car.


Make your wheels extremely shiny

We all know that they are the part of the car that is most exposed to ambient dirt and that they are more difficult to keep completely clean, but we are going to achieve it.

Tips for cleaning car tires
1. In a bottle, mix 600 ml of cola with 200 ml of glycerin, 50 milliliters of fabulous, and 100 ml of ethyl alcohol. You are going to apply this mixture with a sponge to the tires and you will see them shine. The soda together with the glycerin will give it the shine you want and the use of pine or fabulous will prevent too much dust from adhering to it.

There are also homemade products that can be used to give it shine. You can prepare a formula with two cups of vinegar and two cups of water, and thereby remove impurities from the tire. Another preparation consists of mixing 250ml of liquid glycerin and 750ml of distilled water; it should be spread over the rims with a brush and then allowed to dry. The end result will be shiny shoes.

2.  Another way is by applying a brush on the rims and thus removing all the dirt that accumulates from daily use. Make sure that the brushing is so deep that it reaches the rim cavities where the brakes are located since this area is sensitive to corrosion. After cleaning, wait for them to dry and you can show off how clean they are.

3. Finally, the other formula that you can do at home is to mix baking soda and water to make a paste, then apply the mixture to the tires with a brush, let the preparation sit for a few minutes to take effect and finally rinse them.

4. Apply wax on the tires as you do on the car because it will also help you preserve the cleanliness of these. Polishing them will help protect them from dust and other harmful elements, like UV rays.

5. Always have a dedicated brush on hand especially for cleaning tires, since the shape of this brush is what will help you remove dust and all the dirt from those areas that are difficult to clean.
If you want to reinforce the cleaning, the safest thing is to apply a layer of a product with a protective and anti-dust silicone. This will increase the shine and serve as a cover that will give the work done greater durability.

The good appearance of your wheels is not only due to aesthetics but also to good maintenance of them, which will be useful for their greater durability. Some take the necessary time and do a deeper cleaning, removing them from the car and removing the dirt that is in hidden areas behind the screws or axles.

If you need any professional help with your vehicle repair, Speedy Bumper Repairsandiegobumpers.com is there to give you the service that you need.

What should be taken into account when reviewing solar panels?

The decision to install a solar thermal system is becoming more common due to the many benefits they offer. These systems are characterized by the durability of their materials and their resistance, however, their production can be affected if we do not carry out an exhaustive review of the solar panels in order to carry out proper maintenance.

Thermal solar panels have to meet a series of conditions so that their production is optimal and losses are not generated due to factors such as: accumulated dirt, poor orientation and inclination or technical problems that require professional supervision… With good maintenance and repair of solar panels we will be able to ensure 100% productivity.

Why is good maintenance necessary?

Thermal solar panels are constantly exposed to residue or weather conditions that can cause numerous damages and breakdowns. Therefore, it is essential to carry out periodic reviews of each of the parts.

Supervision by a professional will allow you to enjoy the performance of your plates and make the most of both their production and the energy savings they provide.

At Heat Me Solar Panels and Heating we carry out preventive maintenance in which a complete overhaul of the equipment is carried out together with the change of the magnesium anode and filling with antifreeze. In addition, with corrective repairs we replace all kinds of wear parts: valves, resistors, gaskets, shells or drains.

What points must be taken into account at the time of the review?

To carry out a correct review and maintenance of thermal solar panels , all areas of the installation must be taken into account , from the most visible and accessible part of the installation, such as the solar panels, to the thermostatic valves or resistances that require professional supervision.

The areas to consider are:

  • Solar panel or collector
  • safety valves
  • Deposit
  • Control units
  • connection keys
  • Control units
  • silicone gaskets
  • structures
  • magnesium anodes
  • resistors
  • thermostatic valves
  • Empty tubes

NB: Here is a video on the common mistakes people make when going solar;

How often do you have to check the solar panels?

The periodicity of the review will depend on the part of the installation that you want to check and the type of review.

Every 3 months, the glass of the collectors, the joints and the connections must be cleaned to ensure that there is no residue that could affect its operation. In addition, you will have to visually check the structure to detect possible imperfections. For this type of inspection and maintenance of solar panels, a specialist is not required, since they are lighter tasks that can be carried out by anyone.

On the other hand, every 6 months a review of pipes and insulation will have to be carried out to detect and repair possible failures. This review will have to be carried out by a specialist and will allow us to see if there are signs of moisture, leaks or deformation somewhere in between.

It will be after 12 months when the sensors must be checked to locate faults in time and be able to repair them. This maintenance is necessary to ensure optimal performance throughout the next year in the production of hot water.